Goss Community SSC Press SSC 997 and 1012 comprising:
Four (4)- 4 High towers designed for register of 4-colour process printing
Four (4)- MegTec automatic zero speed splicer’s (50”), 90 degrees
Two (2)- SSC Folders, one with upper former
Two (2)- Parker SSD590 DC drives with motors.
Cut-Off (Nominal) - 578 mm
Maximum Web Width - 889 mm
Minimum Web Width - 584 mm
Maximum Running Speed - 35,000 copies per hour
Four (4) Goss Community SSC 4 High tower arrangements, consisting of:
Four perfecting units stacked on top of each other.
One web in each 4Hi tower printing 4+4 colour
Swing down ink fountains with twenty (20) motorized Goss remote controlled ink keys, one-piece ink fountain blades.
Each printing couple has an eight (8) roll ink train consisting of one (1) direct gear driven steel ink fountain roller, (1) knurled micrometric roller, two (2) ink oscillator drums with Rilsan covering, two (2) transfer rollers with rubber covering, and two (2) form rollers with rubber covering.
Spiral brush style dampening system, complete with
one (1) variable speed water pan roller with press speed tracking, one (1) fixed speed brush roller, one (1) oscillating chromed transfer roller, and one (1) rubber form roller.
Each plate cylinder is solid stainless steel and with a slot gap plate lockup system.
o Single register pin
o Standard plate cylinder undercut of.012" (.305 mm) for.012" (.305 mm) plates.
Each blanket cylinder is solid stainless steel with bearers and uses a T-bar blanket lock up.
Central grease lube on operating side for improved lubrication and ease of maintenance.
Pneumatic control of the ink, water and impressions sequentially timed to the press speed.
Goss motorized registration system controlled from the screen mounted on the console.
Double hinged doors on operating side.
Complete set of press unit safety guards with interlocks.
Four (4) Megtec Zero Speed SE fully automatic splicers, featuring:
Maximum reel diameter 1270mm (50”)
Maximum splicing speed 6.6 m/s
Free standing design (No mechanical connection)
Electric hoist with safety limits (No lifting required)
Motorized adjustable sidelay + - 20mm
Low riding festoon minimizes web span
Dancing roller holds web tension constant during splicing
Automatic or Manual Splicing Sequence
Roll stand holds two full reels of paper
Two 75mm (3”) air shafts and one spare
A new reel can be loaded immediately after a splice
Remote web tension & reel sidelay
Four (4) shaft driven Infeeds
Four (4) Megtec one web angle bars with blowers
Two (2) Goss SSC Folders for BROADSHEET and TABLOID products with:
Two pair of driven nipping rollers, manually adjustable on the run
One -around cutting cylinder & two-around folding cylinder
Manual lap adjustment at standstill - Even to 7mm, pin side long
Manual pin cam adjustment at standstill
Folder Fly delivery:
o Reverse fly delivery
o Consistent copy spacing
o Folded edge leading
o Delivery conveyor
Oil lubrication for drive side
Heavy duty drive gears
Slip gear arrangement to protect folder
Rugged frame design with rigid cross members
Box design frames for drive side
Folder safety guards with interlock
RTF trolleys with tabloid slitter–pneumatic control
Former chrome plated and drilled for
Blower for former
One (1) UPPER FORMER
o Maximum capacity 4 webs broadsheet
o Installed on folder F2
Two (2) QUARTER FOLDERS
o Cycloidal folding device with rotary brush
o Tape delivery and airfoil for product control
One (1) DOUBLE PARALLEL FOLD